Free WordPress Hosting for 3 months with Code: FREE3
They provide 1GB space and 10GB Bandwidth. Reliable Shared Hosting with an easy 1-click wordpress install setup with Softaculous. They are a linux based hosting provider, most probably CentOs.The customer support is 24/7 and excellent. Check them out.
Cirtexhosting Sucks! Cirtexhosting was just horrible!! I got really crappy uptime. The service was pretty pathetic and I never got a refund for the 99% uptime guarantee. I was losing valuable adsense revenue. I couldnt take it anymore. The prices might have been good, especially since I needed FFMPEG hosting, but I had to call it quits.
I switched to a much better host, HawkHost. Prices are reasonable, Support is great… so far. The CEO himself helped me with a troubleshooting ticket.
To get this working, you will first have to root your styleflying android tablet.
This tablet is not like other android devices which are easily connected to adhoc by editing the tiwlan.ini and wpa_suplicant.conf. In fact, there is no tiwlan file on the device. We will have to use an alternate method, however, we will still be patching our wpa_supplicant.
The first step is to make an adhoc connection from your phone, laptop or desktop and name the ssid as ‘droidhoc’ and make sure you do not use a WEP key (it causes unnecessary problems). Set your ip address to static and use 192.168.0.1 (or you can use dhcp, but sometimes this causes problems). If you set static, then make sure you use a static IP, like 192.168.0.2, on your device under advanced settings. Set the mask to 255.255.255.0 and dns to 192.168.0.1.
The next step is to connect the gpad with adb and I will assume you know how to do that.
now we will type the following:
su (for superuser mode)
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system (mount partition as writable)
cp /data/misc/wifi/wpa_supplicant.conf /sdcard/ (copy configuration file to sdcard)
exit (to exit out of adb)
adb pull /sdcard/wpa_supplicant.conf / (pull the file off the sdcard to edit it)
Now edit the file with your text editor and enter the following after the line ctrl_interface=DIR=/data/system/wpa_supplicant GROUP=system:
Place the wpa_supp file back and change owner, permissions and reboot:
adb push /wpa_supplicant.conf /sdcard/wpanew.conf
cp /sdcard/wpanew.conf /data/misc/wifi/wpa_supplicant.conf
chown wifi.wifi wpa_supplicant.conf
chmod 777 wpa_supplicant.conf
Once your phone is rebooted, we will download the HydTech’s adhoc wifi app from the market and run it.(app costs only $1.99)
Enjoy your new adhoc connection!
Modified these directions from augendev:
1. Download superuser Eclair/Froyo version
2. Unzip and copy Superuser.apk from /system/app and su from /system/bin to your sd card
3. adb shell
4. cp /sdcard/Superuser.apk /system/app/
5. cp /sdcard/su /system/xbin/
6. rm /system/bin/su
7. ln -s /system/xbin/su /system/bin/su
8. chmod 6755 /system/xbin/su
When the android tablets are mass produced, I think all of them are given the same android id so I think google is blocking them and that is why you get downloads stuck at “starting download”. Also, random notifications popup saying download of such and such app was unsuccessful when you havent even tried to download that app. So we need to change our androidid. Either get one from another phone you are using or create one from an emulator. The problem with using your phone id is that the same app downloaded on your slate is downloaded to your phone. I used the id from my HTC Hero.
Here’s what I did (directions from slatedroid.com):
1. connect the Hero using adb
sqlite3 /data/data/com.google.android.googleapps/databases/gls.db "select * from meta";
3. write down this androidid somewhere!
4. connect gpad with adb
sqlite3 /data/data/com.google.android.googleapps/databases/gls.db "update meta set intvalue=XXXXXXXXXXXXXXXXXXX where name='androidId'";
(obviously replace XXX’s with your id)
6. restart and enjoy market!
After waiting for nearly 5 weeks, I finally got to test out my new Gpad G10, aka Haipad, aka iRobot, aka Moonse E7002, aka aPad, aka pandawill, aka HSG-X5a. I ordered this device from House of Dap and including shipping and case, it cost $172.
First things first:
The main reason I picked this pad over the other is because of the metallic shell and the look and feel of an iPad. I also wanted atleast Android OS 2.1 so I can test and debug my live wallpapers. The specs for this beast include:
* Processor: Telechips TCC8902 720mHz
* Screen 7” TFT Touch Screen, 800×480 Dots
* RAM : 256MB DDR
* Internal memory: 4GB
* Power: 3500mAh
* Built-in Camera
* Operating System : Android 2.1
Upon first glance, I was disappointed with the build quality of the tablet. The aluminum backing was not as smooth as the ipad back and behind the front plastics seems to be a flimsy black tape holding down the LCD. It just does not give it a professional look.
Turning it on:
When I turned it on, there were 3 droids on a metallic spaceship like surface as the boot screen which looked cool. But then, everything else in terms of usability was a disappointment:
-The market worked for a few minutes and paused on downloading.
-Orientation did not work properly for a few apps.
-Some 3D games like angry birds had texture loading problems.
-Only one USB worked and the other was only for USB debugging (no charging mode)
-Pressing middle button puts the gpad to sleep and not home (like ipad)
-Side buttons (which you would assume are for volume) are for menu and go back.
-Not rooted properly.
-Touch panel is not like iPad (which is obvious because it is resistive)
Most of these problems were not a big deal. I eventually managed to fix most of these problems but the most important ones for me were to Fix root on my gpad, Fix market on my gpad and set up adhoc wifi on my Styleflying T72. YES! You read right…. After hours of work, I figured out how to adhoc on my GPAD! Now I can surf the web at work.
Overall, the Styleflying GPAD G10 is a snappy device after performing some hacks and tweaks. Eventually, the goal is to get a samsung galaxy tab but for those of you who cant shell out $600 plus cash, this sub-$200 tab will suffice for now.
I’m trying to update one of my live wallpapers on the android market but now it seems a new field is required; Hi Resolution Application icon. (You know what this means)
Methinks that google is becoming android tablet compatible and expect a few new android tablet devices by Christmas time.
Other new fields that I noticed are: Feature graphic and Promotional video.